• Wing armrchair tailor made color red
  • Custom made wingback armchair dark brown - measurements
Wing armrchair tailor made color red New

Wingback chair brown, tailor made for the elderly

  • Reference: OREILLE-MARRON-NAT

The width of the seat is equal to the width of your hips plus 2 to 5 cm. To measure it, sit on a flat surface, place two parallel blocks against your hips, measure the distance between them and add 2 to 5 cm.
largeur fauteuil sur mesure

To measure the depth of the seat, sit on a flat surface.

1. Measure the distance from the wall to the recess at the back of the knee.
2. Remove about 4 cm to get the seat depth measurement of the chair.

Comment mesurer la profondeur d'un fauteuil fabriqué sur-mesure ?


Correct measurement of the seat depth will result in better weight distribution over the entire seat, better blood circulation and therefore greater comfort.
It is important that the seat is not too deep so that it does not rest on the popliteal fossa at the back of the knee, which would hinder venous return.

To measure the height of the seat
1- Sit on a surface that is high enough so that your feet do not touch the floor.
1. Add books under the feet so that :
- the front of the thigh rests on the front of the seat (no hand should be able to pass through).
- the feet are no longer in the air
3. Measure the distance from the underside of the heel to the seat

Comment mesurer la hauteur de l'assise d'un fauteuil

If the seat is too high, the knees are up and the supports are more important at the bottom of the seat; the sitting position is quickly painful.
If it is too low, the feet are not on the floor and the user slides forward.

To measure the height of the backrest sit on a flat surface. You can choose between 3 types of backrest.
Classic backrest (Figure 1)
Pinch a pencil under the armpits and measure the height of the seat with the pencil.

Comment mesurer un dossier court
Mid-high backrest (Figure 2)
Measure the height from the seat to the shoulder blades or base of the cervical vertebrae.
Mesure d'un dossier moyen
High backrest (Figure 3)
Measure the height from the seat to the rearmost part of the head.
Mesurer un dossier haut

Variants:
Fauteuil rouge à oreilles, taillé sur mesure
Fauteuil bleu à oreilles, taillé sur mesure
Fauteuil marron à oreilles, taillé sur mesure
Fauteuil violet à oreilles, taillé sur mesure
Fauteuil jaune à oreilles, taillé sur mesure
Fauteuil orange à oreilles, taillé sur mesure
Fauteuil gris à oreilles, taillé sur mesure
Fauteuil vert à oreilles, taillé sur mesure
Fauteuil anthracite à oreilles, taillé sur mesure

The brown wingback chair features a high backrest with two wings, that were origanlly designed to avoid draughts in the neck.
Made to measure it is perfectly suited to small, tall or medium size elerly people.
You can stand up easily thanks to its long armrest and high resilience padding.

Description

Benefits of a brown tailor made chair

Made to measure, it allows you to sit comfortably all day long and to adopt a good posture for your back.
The benefits of a customised chair for an elderly are :
. a customised height and depth of sitting allows, by distributing the support pressures harmoniously, to improve blood circulation; in this way, pain felt in the buttocks due to poor vascularisation in relation to the ischials is avoided
. a custom-made seating depth allows you to sit at the bottom of the chair, with your back resting against the backrest; the spine thus retains its natural curvature
. the seat does not rest against the calf so that the venous return is not slowed down
. a seat angle of 10° reinforces these benefits by making it easier for the back to rest against the backrest and reducing pressure on the seat.
How to take Armchair measurements ?

High quality foam

Bultex foams used for seat and back cushions have a high resilience, which means that they retain their original properties for a long time. Their relative thinness, compared to a traditional lounge chair, makes it easier to get up and avoid the hammock effect. For the chair to be comfortable for hours during this seat foam at a high density of 38 Kg/m3.

Easy to pack and unpack

The chair structure consists of 4 MDF* panels with slots: they can be assembled without tools. The seat can be quickly dismantled for transport or storage in a reduced volume.
MDF panels are dyed in the mass: if a panel is damaged on its surface it can be sanded down to its original colour.

Why choose a brown armchair?

With the colour brown, you can induce a feeling of naturalness and comfort in your living room.
The colour brown can be very pleasant if you think of chocolate. This colour is very often found in nature. Almost all the plants we find have the colour brown. In many places, brown is the colour of the earth.
Brown can give us a sense of security and stability.
It is a neutral colour that goes well with most other colours. You can combine the brown structure of the chair with black, red, green or yellow seat cushions.

Data sheet

  • Seat foam

    High resilience Bultex firm foam with a density of 40 Kg/m3. Thickness 50 mm. Bultex is a high quality foam for a lasting support.

  • Backrest foam

    Bultex high resilience PU foam 30 Kg/m3 thickness 50 mm for a lasting support and comfort

  • Seat angle

    The angle of the seat is 9° (to the ground) and the angle of the backrest is 18° (to the vertical).

  • Frame

    19 mm thick Valchromat panels, tinted with organic dyes. On the surface there are small pure wood fibres which have not absorbed the organic dyes.

  • Structure finish

    3 layers of clear matt vitrifier - Ceramic Technology V33: high performance resin combined with ceramic microbeads, creating a shield and increasing strength by 40%.

  • About manufacturing

    Made in France from Valchromat panels made in Portugal. Precision cutting of the base to measure with a numerical control. Handcrafted finishing of the structure and cushions.

  • Delivery and assembly

    Delivery flat-pack to reduce CO2 emission, in a wooden crate. The grooved panels can be assembled without tools (some accessories may require the use of a screwdriver for assembly).

  • Maintenance

    Removable cover. Wash cushion and frame with mild detergent ( water and soap ).

  • Structure color

    Brown

In the same category

16 other products seleted for you