Mon Siège à Moi furniture is transported flat to reduce the environmental impact during transport.
1- Take the components of the chair out of the box and let them dry at room temperature in a dry room for 24 hours.
2- Slide the seat into the right and left armrests LET THE SEAT EXCEED 10 cm IN FRONT OF THE ARMRETS. Push the seat fully only once the backrest has been installed (see next step).
3-Slide the backrest into the armrests. The horizontal female slot of the backrest must be opposite the male slot at the back of the seat.
4- Push the seat all the way in so that the slot at the back of the seat fits into the horizontal slot in the backrest.
The slot must extend at least 3 cm beyond the back of the backrest.
Screw the "Stop" on the back of the backrest under this slot in the seat to prevent the seat from sliding forward.
5- The chair is now assembled.
