High stool Aero, made to measure
- Reference: TAB-BAR-NAT
The width of the seat is equal to the width of your hips plus 2 to 5 cm. To measure it, sit on a flat surface, place two parallel blocks against your hips, measure the distance between them and add 2 to 5 cm.
To measure the depth of the seat, sit on a flat surface.
1. Measure the distance from the wall to the recess at the back of the knee.
2. Remove about 4 cm to get the seat depth measurement of the chair.
Correct measurement of the seat depth will result in better weight distribution over the entire seat, better blood circulation and therefore greater comfort.
It is important that the seat is not too deep so that it does not rest on the popliteal fossa at the back of the knee, which would hinder venous return.
To measure the height of the backrest sit on a flat surface. You can choose between 3 types of backrest.
Classic backrest (Figure 1)
Pinch a pencil under the armpits and measure the height of the seat with the pencil.
Mid-high backrest (Figure 2)
Measure the height from the seat to the shoulder blades or base of the cervical vertebrae.
High backrest (Figure 3)
Measure the height from the seat to the rearmost part of the head.
Distance from the footrest to the seat ( C on the picture)
Height from the floor to seat ( A on the picture underneath)
You can also substract 22 cm from the height of the table or from the height of the bar.
Modern kitchens are often equipped with a central island for eating and cooking. The table is high and it is sometimes difficult to find a bar stool adapted to both its size and the height of the table.
To ensure that your comfort is optimal whatever your morphology, the Aero bar stool is made to measure based on your measurements.
It is delivered flat packed to reduce its carbon footprint during transport.
The Aero bar stool is made in France from panels of Corrèze (wood of French origin) nourished and protected by a natural oil.
To take your measurements, simply follow our guide.
The angle of the seat is 3° (to the ground) and the angle of the backrest is 13° (to the vertical). It can be adjusted on demand.
MDF panels from Corrèze made with wood from French forests. The panels are protected by a natural hard oil (pearl effect) which gives a chocolate tint to the panels.
PERLOleo Classic natural hard oil for indoor use. The oil nourishes the wood and has a water-repellent effect. It consists of vegetable oils, natural additives and oil derivatives.
Made in France from panels made of French wood. Precision cutting of the base to measure with a numerical control. Handcrafted finishing of the structure and cushions.
Delivery and assembly
Delivery flat-pack to reduce CO2 emission, in a wooden crate. The grooved panels can be assembled without tools (some accessories may require the use of a screwdriver for assembly).