Made to measure Spacio armchair, for indoor and outdor use
- Reference: SPACIO-CLAS
The width of the seat is equal to the width of your hips plus 2 to 5 cm. To measure it, sit on a flat surface, place two parallel blocks against your hips, measure the distance between them and add 2 to 5 cm.
To measure the depth of the seat, sit on a flat surface.
1. Measure the distance from the wall to the recess at the back of the knee.
2. Remove about 4 cm to get the seat depth measurement of the chair.
Correct measurement of the seat depth will result in better weight distribution over the entire seat, better blood circulation and therefore greater comfort.
It is important that the seat is not too deep so that it does not rest on the popliteal fossa at the back of the knee, which would hinder venous return.
To measure the height of the seat
1- Sit on a surface that is high enough so that your feet do not touch the floor.
1. Add books under the feet so that :
- the front of the thigh rests on the front of the seat (no hand should be able to pass through).
- the feet are no longer in the air
3. Measure the distance from the underside of the heel to the seat
If the seat is too high, the knees are up and the supports are more important at the bottom of the seat; the sitting position is quickly painful.
If it is too low, the feet are not on the floor and the user slides forward.
To measure the height of the backrest sit on a flat surface. You can choose between 3 types of backrest.
Classic backrest (Figure 1)
Pinch a pencil under the armpits and measure the height of the seat with the pencil.
Mid-high backrest (Figure 2)
Measure the height from the seat to the shoulder blades or base of the cervical vertebrae.
High backrest (Figure 3)
Measure the height from the seat to the rearmost part of the head.
The Spacio armchair is designed for indoor or outdoor use with FINCOF® panels, consisting of birch veneers coated on both sides with a smooth phenolic film. The surface coating guarantees high resistance to abrasion and punching. It is unaffected by weather, humidity, heat and products.
This chair for indoor or outdoor use has a structure made of 4 panels with slots; it can be dismantled without tools to be moved or stored in a compact space.
Because we believe that an armchair should be cut like a piece of clothing, according to your size, we will ask you for your measurements to make to order a seat adapted to your morphology. Take your measurements by following the guide
Another advantage of this made-to-measure manufacture is that you can adapt the width of your chair according to the space you have available.
High resilience Bultex firm foam with a density of 40 Kg/m3. Thickness 50 mm. Bultex is a high quality foam for a lasting support.
Bultex high resilience PU foam 30 Kg/m3 thickness 50 mm for a lasting support and comfort
The angle of the seat is 9° (to the ground) and the angle of the backrest is 18° (to the vertical).
FINCOF® plywood is a panel consisting of 1.4 mm thick cross-ply birch veneers of BB quality, coated on both sides with a smooth phenolic film. It is unaffected by weather, humidity and heat.
Made in France (in Vendée). Precision machining of the panels on numerical control.
Delivery and assembly
Delivery flat-pack to reduce CO2 emission, in a wooden crate. The grooved panels can be assembled without tools (some accessories may require the use of a screwdriver for assembly).
The cushions are removable. The panels can be cleaned with a cloth soaked in liquid soap.