Dining chair Aero, with footrest, made to measure
- Reference: C-POINT-3-9-MDF
The "Pointillé" chair is designed for people under 165 cm tall.
If you are used to putting cushions on standard chairs to sit at the right height at the table this chair is for you.
You can choose to have a higher seat than the standard chair to be at the right height around a standard height table.
As the seat is raised, your feet naturally do not touch the floor; the chair is therefore equipped with a footrest.
The overall width of the chair is equal to the useful width of the seat plus 4 cm.
Benefits of the custom-made "Pointillé" chair
You choose the height of the seat in relation to the floor to be at the right height around a dining room table or office.
Your feet are at the right height on the footrest. This ensures that the pressure on the seat is evenly distributed.
Other features of the custom-made "Pointillé" chair
The chair is delivered flat packed to reduce its carbon footprint during transport.
The "Pointillé" custom-made chair is made in France from Corrèze wood panels (French origin) nourished and protected by a natural oil.
The cushions are made of synthetic rubber (the same type of foam used for yoga mats). They can be cleaned with a sponge and soap.
To take your measurements, simply follow our guide.
High resilience synthetic rubber foam. Thickness 15 mm.
The angle of the seat is 3° (to the ground) and the angle of the backrest is 9° (to the vertical). It is an ideal position around a table to eat or play cards.
MDF panels from Corrèze made with wood from French forests. The panels are protected by a natural hard oil (pearl effect) which gives a chocolate tint to the panels.
PERLOleo Classic natural hard oil for indoor use. The oil nourishes the wood and has a water-repellent effect. It consists of vegetable oils, natural additives and oil derivatives.
Made in France from panels made of French wood. Precision cutting of the base to measure with a numerical control. Handcrafted finishing of the structure and cushions.
Delivery and assembly
Delivery flat-pack to reduce CO2 emission, in a wooden crate. The grooved panels can be assembled without tools (some accessories may require the use of a screwdriver for assembly).
The panels and the cushion can be cleaned with a cloth soaked in liquid soap.