Rocking chair Color yellow
- Reference: ROCKING-VAL-ORANGE
The width of the seat is equal to the width of your hips plus 2 to 5 cm. To measure it, sit on a flat surface, place two parallel blocks against your hips, measure the distance between them and add 2 to 5 cm.
To measure the depth of the seat, sit on a flat surface.
1. Measure the distance from the wall to the recess at the back of the knee.
2. Remove about 4 cm to get the seat depth measurement of the chair.
Correct measurement of the seat depth will result in better weight distribution over the entire seat, better blood circulation and therefore greater comfort.
It is important that the seat is not too deep so that it does not rest on the popliteal fossa at the back of the knee, which would hinder venous return.
To measure the height of the seat
1- Sit on a surface that is high enough so that your feet do not touch the floor.
1. Add books under the feet so that :
- the front of the thigh rests on the front of the seat (no hand should be able to pass through).
- the feet are no longer in the air
3. Measure the distance from the underside of the heel to the seat
If the seat is too high, the knees are up and the supports are more important at the bottom of the seat; the sitting position is quickly painful.
If it is too low, the feet are not on the floor and the user slides forward.
To measure the height of the backrest sit on a flat surface. You can choose between 3 types of backrest.
Classic backrest (Figure 1)
Pinch a pencil under the armpits and measure the height of the seat with the pencil.
Mid-high backrest (Figure 2)
Measure the height from the seat to the shoulder blades or base of the cervical vertebrae.
High backrest (Figure 3)
Measure the height from the seat to the rearmost part of the head.
The Rocking Chair Color is made in France from panels in Valchromat, a particleboard, colored in the mass with natural dyes.
The cushion seat is made of Bultex, a durable and comfortable foam, and the Teflon-coated cover is water-repellent.
The chair can be used outside under cover (under a porch for example).
To find out how to take your dimensions click on the red magnifying glasses next to the drop-down menus above. If you wish other dimensions than those proposed in the drop-down menu, please complete the fields below. Don't forget to save the customization before adding the product to the basket.
For your comfort is optimal whatever your morphology it is made to measure from your measurements.
Thus the seat will be neither too long, nor too short, nor too low, nor too high.
You can even specify the height of the backrest if you wish.
The upholstery is made of high resilience Bultex foam for long-lasting comfort. It is protected by a Teflon-coated polyester fabric to give it a water-repellent effect.
The chair is packed flat to reduce its carbon footprint during transport. The assembly of the structure is done without tools (it may be necessary to use a screwdriver for the assembly of accessories).
High resilience Bultex firm foam with a density of 40 Kg/m3. Thickness 50 mm. Bultex is a high quality foam for a lasting support.
Bultex high resilience PU foam 30 Kg/m3 thickness 50 mm for a lasting support and comfort
Variable ( rocking motion)
19 mm thick Valchromat panels, tinted with organic dyes. On the surface there are small pure wood fibres which have not absorbed the organic dyes.
3 layers of clear matt vitrifier - Ceramic Technology V33: high performance resin combined with ceramic microbeads, creating a shield and increasing strength by 40%.
Made in France from Valchromat panels made in Portugal. Precision cutting of the base to measure with a numerical control. Handcrafted finishing of the structure and cushions.
Delivery and assembly
Delivery flat-pack to reduce CO2 emission, in a wooden crate. The grooved panels can be assembled without tools (some accessories may require the use of a screwdriver for assembly).
The cushions are removable. The panels can be cleaned with a cloth soaked in liquid soap.